Checking the consignment note number in Opter Driver

You can set the consignment note number to be checked by the driver when changing the status of a shipment to Korje and/or Kohale toimetatud in Opter Driver. In this case, the driver cannot save the status change until the freight bill number has been checked and is correct. The setting is made in the customer register.

Decide for which customers the check should be done

Click on Register > Kliendid and make the settings on the Tellimuse sätted tab for each customer for whom a check of the freight bill number is to be done.

Decide whether the check should be done during loading or unloading

Under Veokirja number on the Tellimuse sätted tab in the customer register, select whether the check is to take place during loading or unloading, or both:

• Kontrollige kehtivat veokirja numbrit: the freight bill number is already entered in Opter Driver and the driver just needs to check that it is correct.

• Sundige uue veokirja numbri sisestamist: the driver has to enter the freight bill number in Opter Driver, either by hand or by scanning the freight bill.

By default, the check is made when the status of the first shipment of an order changes to Korje and/or when the last shipment of an order changes to Kohale toimetatud/Kohale toimetatud, i.e. at the sender and/or receiver of the order. However, it can be defined that the check is done during the loading or unloading of each shipment on the order by setting the mobile data setting CheckFreightBillAtAllPickUpAndDelivery to "True". For information on how to set up mobile data settings, see Mobiilse andmeside seaded (window).

Additional checks (optional)

It can be set how carefully the freight bill number is checked.

• Verify the number using a modulus 10 calculation. Make the setting in the Kontrollnumbri arvutamine drop-down list.

  To calculate the checksum, the consignment note numbers must consist of numbers only.

• Enter the number of digits the number should have. If the number of digits does not need to be checked, enter “0” in the Tähemärkide arv field.

Example

If the freight bill number should consist of 9 digits and be entered in Opter Driver when loading at the sender, and also at each terminal during the journey. Make the following settings:

1. Opteri driveris korjel: Select Sundige uue veokirja numbri sisestamist.

2. Tarnimisel Opter Driveris: Select Tšekki pole.

3. Tähemärkide arv: ”9”.

4. CheckFreightBillAtAllPickUpAndDelivery: "True".

5. SetMultipleStatusPermission: We recommend setting this to “False”.

See also

• Kliendid (window)

• Mobiilse andmeside seaded (window)

• Setting how status can be changed in Opter Driver for Android

• Setting how status can be changed in Opter Driver

• Check consignment note number in Opter Driver (classic)

• Checking the freight bill number in Opter Driver

• Pods (POD) in Opter Driver