Adding a ferry consisting of two terminals and the distance between them

Step 5: Create the two terminals (ports) that form the ferry

1. Click on Register > Terminalid.

2. Click on to create a new terminal. Give the terminal a code and a name, the rest is optional. For more information, see Terminalid (window).

3. Click on Salvesta to save all changes.

4. Click on to create the second terminal to be included in the ferry. Give the terminal a code and a name, the rest is optional.

5. Click on Salvesta to save all changes.

6. On the Hinnakujundus ja jagamine tab in the Hoidke ressurss pärast jagamist alles ja määrake sama ressurss järgmistele saadetistele field, configure the same settings for both terminals included in the ferry:

   • The Juht checkbox. Select this checkbox because you have chosen to include the driver who has been assigned the shipments on the ferry, and the driver will continue to have the shipments after the ferry.

   • The Sõiduk checkbox. Select this checkbox because you have chosen to include the vehicle that has been assigned the shipments on the ferry, and the vehicle will continue to have the shipments after the ferry.

   • The Haagis checkbox.

     It does not matter whether this checkbox is selected or deselected, because it is always mandatory to include the trailer resource type in the ferry in this scenario, i.e. when the ferry consists of two terminals and the distance between them.

   • The Alltöövõtja checkbox. Select this checkbox because you have chosen to include the subcontractor which has been assigned the shipments on the ferry, and the subcontractor will continue to have the shipments after the ferry.

7. Click on Salvesta to save all changes.

8. Configure the same settings on the Hinnakujundus ja jagamine tab in the Hoidke ressurss pärast jagamist alles ja määrake sama ressurss järgmistele saadetistele field for the second terminal included in the ferry.

9. Click on Salvesta to save all changes.

Step 6: Add a ferry

This is how to create a ferry (ferry line) consisting of a Terminalist and a Terminali, and the route between them:

1. Click on Register > Parvlaevad.
2. Click on to create a new ferry.
3. Give the ferry a Nimi, for example “STO-HEL”, to indicate that the direction of the ferry is Stockholm to Helsinki.

4. Enter the ferry terminals (ports) between which the ferry line runs in the Terminalist and Terminali drop-down lists.

5. The Jagage saadetised automaatselt terminalides checkbox is used to configure how to define a ferry in Opter. Select the checkbox to define a ferry as two terminals (ports) and the route between them.

6. Enter the ferry’s Väljumisaeg, Saabumise aeg, Pluss päevad and Ajakava. For information about how to fill in these fields, see Parvlaevad (window).

7. Click on Salvesta to save all changes.

Step 7: Link Opter with PTV to get correct distances

To get the correct distance, the ferry lines in Opter need to be linked to the ferry lines in PTV. We recommend that you do this for all your ferry lines, but make the setting for one ferry line at a time.

Proceed as follows:

1. Click on Register > Parvlaevad and click on the Distance tab. In the list on the far left, select the ferry line (ferry) you want to link with PTV.

2. Search for ferry lines in PTV in one of the following ways:

   • Use the map and click on one of the ferry line's ports or terminals.

   • Use the Otsing box and enter the address of one of the ferry terminals.

   The Result box shows one or more ferry lines that are registered in PTV.

3. In the Result box, click on the ferry line that matches the ferry line (ferry) that you have selected in the list on the left.

4. Click on the Select ferry button.

   The PTV name and PTV ID fields are automatically filled with the information from PTV.

5. Click on Salvesta to save all changes.

Step 8: Register the length of the vehicles

When booking vehicles on a ferry, it is often necessary to specify the length of the vehicles. Check that all your vehicles have their length defined in Opter:

1. Click on Register > Transpordivahendid > Mahutavus.

2. In the Mõõtmed box, in the Pikkus field, enter the length of the vehicle in metres.

3. Click on Salvesta to save all changes.

Step 9: Create the two terminals (ports) that form the ferry

1. Click on Register > Terminalid.

2. Click on to create a new terminal. Give the terminal a code and a name, the rest is optional. For more information, see Terminalid (window).

3. Click on Salvesta to save all changes.

4. Click on to create the second terminal to be included in the ferry. Give the terminal a code and a name, the rest is optional.

5. Click on Salvesta to save all changes.

6. For the terminal from which the ferry departs, configure the following settings on the Hinnakujundus ja jagamine tab in the Hoidke ressurss pärast jagamist alles ja määrake sama ressurss järgmistele saadetistele field :

   • The Juht checkbox. Select this checkbox because you have chosen to include the driver who has been assigned the shipments on the ferry, but the driver will not have the shipments after the ferry.

   • The Sõiduk checkbox. Select this checkbox because you have chosen to include the vehicle that has been assigned the shipments on the ferry, but the vehicle will not have the shipments after the ferry.

   • The Haagis checkbox.

     It does not matter whether this checkbox is selected or deselected, because it is always mandatory to include the trailer resource type in the ferry in this scenario, i.e. when the ferry consists of two terminals and the distance between them.

   • The Alltöövõtja checkbox. Select this checkbox because you have chosen to include the subcontractor which has been assigned the shipments on the ferry, but the subcontractor will not have the shipments after the ferry.

   For more information about the checkboxes in the Hoidke ressurss pärast jagamist alles ja määrake sama ressurss järgmistele saadetistele box, see Terminalid (window).

7. Click on Salvesta to save all changes.

8. For the terminal to which the ferry is travelling, configure the following settings on the Hinnakujundus ja jagamine tab in the Hoidke ressurss pärast jagamist alles ja määrake sama ressurss järgmistele saadetistele field:

   • The Juht checkbox. Deselect this checkbox because you have chosen to include the driver who has been assigned the shipments on the ferry, but the driver will not have the shipments after the ferry.

   • The Sõiduk checkbox. Deselect this checkbox because you have chosen to include the vehicle that has been assigned the shipments on the ferry, but the vehicle will not have the shipments after the ferry.

   • The Haagis checkbox.

     It does not matter whether this checkbox is selected or deselected, because it is always mandatory to include the trailer resource type in the ferry in this scenario, i.e. when the ferry consists of two terminals and the distance between them.

   • The Alltöövõtja checkbox. Deselect this checkbox because you have chosen to include the subcontractor which has been assigned the shipments on the ferry, but the subcontractor will not have the shipments after the ferry.

   For more information about the checkboxes in the Hoidke ressurss pärast jagamist alles ja määrake sama ressurss järgmistele saadetistele box, see Terminalid (window).

9. Click on Salvesta to save all changes.

Step 10: Add a ferry

This is how to create a ferry (ferry line) consisting of a Terminalist and a Terminali, and the route between them:

1. Click on Register > Parvlaevad.
2. Click on to create a new ferry.
3. Give the ferry a Nimi, for example “STO-HEL”, to indicate that the direction of the ferry is Stockholm to Helsinki.

4. Enter the ferry terminals (ports) between which the ferry line runs in the Terminalist and Terminali drop-down lists.

5. The Jagage saadetised automaatselt terminalides checkbox is used to configure how to define a ferry in Opter. Select the checkbox to define a ferry as two terminals (ports) and the route between them.

6. Enter the ferry’s Väljumisaeg, Saabumise aeg, Pluss päevad and Ajakava. For information about how to fill in these fields, see Parvlaevad (window).

7. Click on Salvesta to save all changes.

Step 11: Link Opter with PTV to get correct distances

To get the correct distance, the ferry lines in Opter need to be linked to the ferry lines in PTV. We recommend that you do this for all your ferry lines, but make the setting for one ferry line at a time.

Proceed as follows:

1. Click on Register > Parvlaevad and click on the Distance tab. In the list on the far left, select the ferry line (ferry) you want to link with PTV.

2. Search for ferry lines in PTV in one of the following ways:

   • Use the map and click on one of the ferry line's ports or terminals.

   • Use the Otsing box and enter the address of one of the ferry terminals.

   The Result box shows one or more ferry lines that are registered in PTV.

3. In the Result box, click on the ferry line that matches the ferry line (ferry) that you have selected in the list on the left.

4. Click on the Select ferry button.

   The PTV name and PTV ID fields are automatically filled with the information from PTV.

5. Click on Salvesta to save all changes.

Step 12: Register the length of the vehicles

When booking vehicles on a ferry, it is often necessary to specify the length of the vehicles. Check that all your vehicles have their length defined in Opter:

1. Click on Register > Transpordivahendid > Mahutavus.

2. In the Mõõtmed box, in the Pikkus field, enter the length of the vehicle in metres.

3. Click on Salvesta to save all changes.

Follow the instructions for the above scenario, but for the checkboxes in the Hoidke ressurss pärast jagamist alles ja määrake sama ressurss järgmistele saadetistele box see the description in Terminalid (window) and make your selection.